READING THE TEST JN0-683 GUIDE MEANS THAT YOU HAVE PASSED HALF OF DATA CENTER, PROFESSIONAL (JNCIP-DC)

Reading The Test JN0-683 Guide Means that You Have Passed Half of Data Center, Professional (JNCIP-DC)

Reading The Test JN0-683 Guide Means that You Have Passed Half of Data Center, Professional (JNCIP-DC)

Blog Article

Tags: Test JN0-683 Guide, Download JN0-683 Pdf, Exam JN0-683 Study Solutions, JN0-683 Valid Test Braindumps, JN0-683 Exam Test

Studies show that some new members of the workforce are looking for more opportunity to get promoted but get stuck in an awkward situation, because they have to make use of their fragment time and energy to concentrate on JN0-683 exam preparation. Our JN0-683 exam materials embrace much knowledge and provide relevant exam bank available for your reference, which matches your learning habits and produces a rich harvest of the exam knowledge. You can not only benefit from our JN0-683 Exam Questions, but also you can obtain the JN0-683 certification.

Juniper JN0-683 Exam Syllabus Topics:

TopicDetails
Topic 1
  • VXLAN: This part requires knowledge of VXLAN, particularly how the control plane manages communication between devices, while the data plane handles traffic flow. Demonstrate knowledge of how to configure, Monitor, or Troubleshoot VXLAN.
Topic 2
  • Layer 3 Fabrics: This section measures the knowledge of professionals managing IP-based networks in data centers. It covers IP fabric architecture and routing, ensuring candidates understand how the network is structured for scalability and how traffic is routed efficiently.
Topic 3
  • EVPN-VXLAN Signaling: This section assesses an understanding of Ethernet VPN (EVPN) concepts, including route types, multicast handling, and Multiprotocol BGP (MBGP). It also covers EVPN architectures like CRB and ERB, MAC learning, and symmetric routing.
Topic 4
  • Data Center Deployment and Management: This section assesses the expertise of data center networking professionals like architects and engineers, focusing on key deployment concepts. Topics include Zero-touch provisioning (ZTP), which automates device setup in data centers without manual input.

>> Test JN0-683 Guide <<

Download JN0-683 Pdf & Exam JN0-683 Study Solutions

One of the best things about ActualTorrent is the convenience it offers. You can access our Juniper JN0-683 dumps PDF format from anywhere and fit you're studying into your busy schedule. No more traveling to a physical classroom, wasting time and money on gas or public transportation. With the Data Center, Professional (JNCIP-DC) (JN0-683) PDF questions, you can study on your own time, in your own place, and at your own pace.

Juniper Data Center, Professional (JNCIP-DC) Sample Questions (Q15-Q20):

NEW QUESTION # 15
You are asked for TX and RX traffic statistics for each interface to which an application server is attached.
The statistics need to be reported every five seconds. Using the Junos default settings, which telemetry method would accomplish this request?

  • A. SNMP
  • B. OpenConfig
  • C. Native Sensors
  • D. gNMI

Answer: C

Explanation:
* Telemetry Methods in Junos:
* Telemetry is used to collect and report data from network devices. For high-frequency statistics reporting, such as every five seconds, you need a telemetry method that supports this level of granularity and real-time monitoring.
* Junos Native Sensors:
* Option C:Native Sensors in Junos provide detailed, high-frequency telemetry data, including TX and RX traffic statistics for interfaces. They are designed to offer real-time monitoring with customizable sampling intervals, making them ideal for the five-second reporting requirement.
Conclusion:
* Option C:Correct-Native Sensors in Junos are capable of providing the required high-frequency telemetry data every five seconds.


NEW QUESTION # 16
You are asked to deploy 100 QFX Series devices using ZTP Each OFX5120 requires a different configuration. In this scenario, what are two components that you would configure on the DHCP server?
(Choose two.)

  • A. the management IP address for each OFX5120
  • B. the IP address of the FTP server
  • C. the MAC address for each OFX5120
  • D. the MAC address of the FTP server

Answer: A,C

Explanation:
* Zero Touch Provisioning (ZTP):
* ZTP allows for the automated configuration of network devices, like QFX Series switches, without manual intervention. During ZTP, a switch will obtain its configuration from a DHCP server and then download the required software and configuration files from a specified server (e.
g., FTP, HTTP).
* DHCP Server Configuration:
* Option B:The DHCP server needs to know theMAC address for each QFX5120to provide a specific configuration based on the device identity. By mapping the MAC address to a particular configuration, the DHCP server can ensure that each switch gets the correct configuration.
* Option D:Themanagement IP address for each QFX5120must also be assigned by the DHCP server. This IP address allows the device to communicate on the network and access the configuration files and other required resources during the ZTP process.
Conclusion:
* Option B:Correct-MAC addresses allow the DHCP server to identify each QFX5120 and assign the appropriate configuration.
* Option D:Correct-Management IP addresses are essential for network communication during ZTP.


NEW QUESTION # 17
You are preparing an sFlow monitoring system configuration.
In this scenario, what Information will be included in the datagram sent to the sFlow collector? (Choose two.)

  • A. the CRC from the sampled packet
  • B. the sending device's serial number
  • C. the source and destination VLAN for sampled packets
  • D. the interlace through which the packets entered the agent

Answer: C,D

Explanation:
* Understanding sFlow Monitoring:
* sFlow is a packet sampling technology used to monitor traffic in a network. It sends sampled packet data and interface counters to an sFlow collector, which analyzes the traffic patterns.
* Information Included in sFlow Datagram:
* Option A:The datagram sent to the sFlow collector includes information about the interface through which the packets entered the agent (the switch or router). This is crucial for understanding where in the network the traffic was captured.
* Option D:sFlow datagrams also include the source and destination VLAN for the sampled packets. This allows for detailed analysis of the traffic flow within different VLANs.
Conclusion:
* Option A:Correct-The ingress interface is included in the sFlow datagram.
* Option D:Correct-The source and destination VLANs are also included, providing context for the sampled traffic.


NEW QUESTION # 18
You want to convert an MX Series router from a VXLAN Layer 2 gateway to a VXLAN Layer 3 gateway for VNI 100. You have already configured an IRB interface. In this scenario, which command would you use to accomplish this task?

  • A. set bridge-domains VLAN-100 routing-interface irb.100
  • B. set vlans VLAN-100 13-interface irb.100
  • C. set protocols isis interface irb.100 passive
  • D. set protocols ospf area 0.0.0.0 interface irb.100 passive

Answer: A

Explanation:
* Scenario Overview:
* Converting an MX Series router from a VXLAN Layer 2 gateway to a VXLAN Layer 3 gateway involves transitioning the router's functionality from simply bridging traffic within a VXLAN segment to routing traffic between different segments.
* Key Configuration Requirement:
* IRB (Integrated Routing and Bridging) Interface:An IRB interface allows for both Layer 2 switching and Layer 3 routing. To enable routing for a specific VNI (VXLAN Network Identifier), the IRB interface must be associated with the routing function in the corresponding bridge domain.
* Correct Command:
* C. set bridge-domains VLAN-100 routing-interface irb.100:This command correctly binds the IRB interface to the bridge domain, enabling Layer 3 routing functionality within the VXLAN for VNI 100. This effectively transitions the device from operating solely as a Layer 2 gateway to a Layer 3 gateway.
Data Center References:
* This configuration step is essential when converting a Layer 2 VXLAN gateway to a Layer 3 gateway, enabling the MX Series router to route between VXLAN segments.


NEW QUESTION # 19
You are asked to interconnect Iwo data centers using a method that provides EVPN Type 2 connectivity, is highly scalable, and limits VXLAN tunnels between border leafdevices. What will satisfy these requirements?

  • A. IP VPN
  • B. Type 2 seamless stitching
  • C. EVPN Type 2 stretch
  • D. over the top full-mesh interconnect

Answer: B

Explanation:
* Requirement Analysis:
* The scenario requires a solution to interconnect two data centers that supports EVPN Type 2 connectivity. The solution must be highly scalable and must minimize the number of VXLAN tunnels between border leaf devices.
* Understanding Type 2 Seamless Stitching:
* Option D:Type 2 seamless stitchingis a method used in EVPN to provide Layer 2 connectivity (such as MAC address mobility) across different VXLAN segments. It is scalable because it allows only necessary tunnels to be established between border leaf devices, reducing the overhead of maintaining a full mesh of VXLAN tunnels.
Conclusion:
* Option D:Correct-Type 2 seamless stitching satisfies the requirement by enabling scalable, efficient interconnection of two data centers with minimal VXLAN tunnels.


NEW QUESTION # 20
......

Do you have the plan to accept this challenge? Looking for a proven and quick method to pass this challenge Juniper JN0-683 exam? If your answer is yes then you do not need to go anywhere. Just visit the ActualTorrent and explore the top features of valid, updated, and real Juniper JN0-683 Dumps.

Download JN0-683 Pdf: https://www.actualtorrent.com/JN0-683-questions-answers.html

Report this page